Introduction to Concrete Floor Coatings

Concrete flooring has a porous surface that permits the water or various contaminants to get into the concrete structure. This can lead to premature damage. The effects of degradation can show signs in terms of laitance, cracking, efflorescence, spalling, MATRIX CRACK etc. Concrete floor coatings can keep the concrete structure safe because they offer the right type of protection to stains, abrasion, freeze or chemical aggression.


Normal coatings can be ristomanager used for various concrete floors without any problem. The available types are epoxies, polyaspartic polyurea, polyurethanes or acrylics. Remember that the coatings that are based on alkyd should not be used for concrete coating, because the resin from the alkyd can react with the compounds or moisture found in the alkaline concrete. The results of this reaction transform the resin into a soft element, which doesn’t function well as a coating and does not protect the concrete structure.


The coating or sealers made out of acrylic are redribbonlive normally thick and they are usually applied two or three mils for every coat. They can be compounds based on water or solvent. The solvent based category is mainly utilized for the exterior applications, while the sealers based on water are used for the inside applications. Plenty of epoxy coatings can be utilized in order to coat concrete. The normal epoxies are made out of different materials, which include amine or polyamide curing agents. The polyamide epoxies have a large flexibility and they resist water, while the amine-cured epoxies have a better resistance to chemicals. The epoxy systems are usually applied in 3 coats. The Novolac resins are used on concrete because they are extremely resistant. hoodpay


This type of coating is widely spread, ledecorfrancais often being used over epoxies or acrylics because it is resistant to UV and it has better abrasion. This can be mixed with a cement-sand matrix in order to create extra-durable polyurethane flooring systems. The PU concrete is popular for its fast return to service.


If the exterior concrete demands a lot of protection, Rare movies on DVD especially against water (brought by wind), the ideal choice is the elastometric coating. This is also a great match for concrete because it can tolerate substrate movement and it can fill certain cracking. This type of coating is normally thick (from 10 to 100 mils dft) and it is very flexible, having low permeability. It is normally used for the outside applications (exterior of buildings, roofing, parking decks), but it can also be used for interior applications (showers, spas, etc.). The resin can represent the basis for other kinds of elastomeric coating (here we can include silicone, acrylic, polyurethane/polyurea hybrid, or only polyurethane). crestin


The concrete surfaces have to be prepared before applying any type of coating. Their preparation can include pressurized water cleaning, mechanical abrasion, Fabric Printing etc. You should always test for the moisture in the concrete.


Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *